Click on the image to check the artwork
Product Advantages
Long Life Cycle: We use magnet to turn valve on and off, there is much less friction so that the service life is more than 5-10 times the traditional valve. That is why we offer longer warranty than our competitors, you get 5 years warranty, anything broken in 5 years = brand new cartridge.
Leak Free: It uses the static sealing mode, while traditional mechanic valve use dynamic sealing. Magnetic valve uses the non-contact full sealing cylinder as the main body, which isolate the internal water flow from the external driving part.
Maintenance-Free: Our valve is made of PPS, one of the best anti-corrosion material. You only need to replace the valve spool when something happens. You will save great amount of maintenance costs.
Light Switch : No matter how high the water pressure is, children, the elderly or disabled can turn it on easily because magnet will help them turn on the valve.
Easy to install: With our instruction, young kids can assemble our product in less than 5 min.
8-00-004-02 Type Ⅱ on off cartridge
Specification |
DN15 |
||||
Use parameters | |||||
Maximum operating temperature |
90℃ |
Opening pressure |
≤7N |
||
Switch trip |
5mm |
Clamp nut torque |
3±0.5N.m |
||
Performance test | |||||
Strength test |
Static pressure 2.5MPa |
Average flow |
≥0.20L/s (0.1 Mpa) |
||
Pressure range |
0.05MPa-0.75MPa |
Delay time |
NO |
||
Seal test |
High pressure |
0.75MPa |
|||
Low pressure |
0.05MPa |
||||
Service life |
500,000 times |
||||
In & out term |
Side in and bottom out |
||||
Main material |
PPS、EPDM、NBR |
||||
Why us?
We are the very 1st. manufacturer who applied magnetism into valve in domestic China.Our new magnetic water-saving valve is leak-free,non-friction,long-life cycle and easy to install.
Company Information
How to visit Xingfa?
Packaging & Shipping
FAQ
Q: Are you trading company or manufacturer ?
A: We do not produce any products directly, but we have assemble production line.
Our cooperated factories produce all faucet accessories and then we combine them in our company. We have our own R&D team.
Q: Payment term?
A: T/T 30% in advance,70% balance before delivery
http://www.xingfa-bathfitting.com/